Single Shot & 2K Mold

  • Mould Manufacturing China

    Mould Manufacturing China

    An injection mold is a part that imparts shape and size to a plastic item during molding. Although structure of molding may vary depending on type and performance of plastic, shape and structure of plastic product, and type of injection machine, basic structure is uniform.

  • Domestic injection moulding company

    Domestic injection moulding company

    Mold design and manufacturing are closely related to plastic processing. The success or failure of plastic processing depends to a large extent on the mold design effect and mold manufacturing quality, while the plastic mold design is based on the correct plastic product design.

  • High quality appliances plastic injection mold

    High quality appliances plastic injection mold

    The tools and products we use in daily life, range from base of the machine tool, outer casing of the machine, to a small screw, button and case of various household appliances, all of which have a close relationship with molding.

  • 2K Double Die Mold Plastic Injection Mould

    2K Double Die Mold Plastic Injection Mould

    2K injection molding: product injection molding with 2 different  plastic materials or 2 colours : efficient and economical

What is 2k injection mold?
2K Injection Mold, sometimes known as 2 materials 2 shots molding or 2 color molding, is an innovative manufacturing process used to produce complicated molded parts from two different materials.....
2K Injection in performed on one machine that is programmed to perform two injections in one cycle.
Injection molding is the process of making custom plastic parts by injecting molten plastic material at high pressure into a metal mold. Just like other forms of plastic molding, after the molten plastic is injected into the mold, the mold is cooled and opened to reveal a solid plastic part.
 
The following five major elements are indispensable in the processing of double-shot molding:
1. Mold evaluation and product analysis Before mold design, mold evaluation and product analysis is a must including the appearance, size and shape to avoid unnecessary complication for two-color mold design.
2. Mold structure An good mold design should not only meet the requirement of customers, but also save costs, reduce the difficulty of processing, shorten the processing time for customers. To achieve this, we must not only fully digest the requirements of customers, but also have an full understanding of injection machine, mold structure, processing technology and processing capabilities of mold factory itself.
3. Material selection Material selection is very important for double-shot molding. It should meet the requirements of wear resistance, toughness, fatigue fracture performance, high temperature performance, cold and heat fatigue resistance, corrosion resistance etc.
4. Parts processing and assembly In addition to reasonable design and material selection, the accuracy of double-shot molding is also crucial in the subsequent processing and assembly. Therefore, in order to ensure precision processing of mold, high-precision advanced processing equipment and experienced technicians are must.
5. Mold testing In order to avoid wasting time and trouble during mass production, it is necessary to adjust and control various processing conditions after mold has been assembled to find the best temperature and pressure conditions. In the trial process, it is necessary to follow reasonable operation steps and record the useful technical parameters in the test process to facilitate mass production of the product.

Send your message to us:

Write your message here and send it to us